Silvercrest SDBS 2200 A1 User Manual

13
SDBS2200A1
GB
IE
Ironing without steam
NOTE
Always set the temperature control
and the steam control to the lowest
level before you switch on the appliance. The symbols on the temperature
control
correspond to the following settings:
● Synthetics – lowest temperature (70 – 120°C)
● ● Wool, silk – medium temperature (100 – 160°C)
● ● ● Cotton, linen – highest temperature (140 – 210°C)
♦ Press the on/off button
to switch on the appliance. The indicator in the
button as well as the “Iron dry” indicator light up.
NOTE
If the "Iron dry" indicator
does not light up, the boiler button is pressed.
Press this button to switch off the boiler function.
♦ Turn the temperature control
to set the desired ironing temperature.
♦ The temperature indicator
lights up while the appliance is heating up.
As soon as the temperature indicator goes out, the set temperature has
been reached and you can start ironing.
♦ If the iron
is fi xed to the base station using the catch , push the
catch release into the position. Now you can remove the iron
from the base station .
♦ After ironing, place the iron
on the base station stand .
Set the temperature control to “MIN”.
♦ Press the on/off button
to switch off the appliance. The indicator in the
On/off button
and the “Iron dry” indicator go out. To avoid tripping
hazards, place the connecting hose in the holder provided, pull the
mains plug out of the socket and press the cable retractor button .
♦ To fi x the iron
back onto the base station push the catch release
into the position. Then you can carry the appliance in just one hand using
the iron handle if you have previously placed the connecting hose in
the holder provided (to avoid a tripping hazard).

Silvercrest SDBS 2200 A1 Specifications

General

Brand	Silvercrest
Model	SDBS 2200 A1
Category	Iron
Language	English