Silvercrest SDBS 2200 A1 User Manual

15
SDBS2200A1
GB
IE
NOTE
To switch to dry ironing while you are steam ironing, press the boiler button
to release it. The "Iron dry" indicator will light up and the indicator in the
boiler button
and then, a little later, the "Steam ready" indicator go out.
You can now iron without steam.
♦ After ironing, place the iron
on the stand of the base station . Set the
temperature control to “MIN”.
♦ Press the boiler button
to deactivate steam ironing mode. The indicator in
the boiler button
goes out.
♦ Press the on/off button
to switch off the appliance. All indicators go out.
To avoid tripping hazards, place the connecting hose in the holder
provided, pull the main plug out of the socket and press the cable retractor
button .
♦ To fi x the iron
back onto the base station push the catch release
into the position. Then you can carry the appliance in just one hand using
the iron handle if you have previously placed the connecting hose in
the holder provided (to avoid a tripping hazard).
Vertical steam ironing
♦ Hang the item to be ironed on a coat hanger that you hold fi rmly in one
hand.
♦ Hold the iron
in a vertical position with the other hand and press the
steam blast button .
♦ Touch the fabric lightly with the soleplate
to remove creases.
♦ Press the Steam stop button
to stop the steam output.
Refi lling the water
NOTE
As soon as the "Water tank empty" indicator
lights up, you must add more
water. See the section "Filling the water tank".
♦ Put the iron on the stand of the base station .
♦ Refi ll the water as described in the section “Filling the water tank”.

Silvercrest SDBS 2200 A1 Specifications

General

Brand	Silvercrest
Model	SDBS 2200 A1
Category	Iron
Language	English