■ 10
│
GB
│
IE
│
NI
│
CY
SDMF 1300 A1
4) Release the steam button as soon as water drips from the steam
head
. The appliance will need to heat up again.
Steaming with the clothes brush
1) Before switching on the appliance, place the clothes brush on the steam
head , making sure that the large wing is on the underside of the steam
head (fig. C). Push the clothes brush onto the steam head until it
clicks into place.
C
2) Switch the appliance on.
3) Hang the item to be ironed on a coat hanger and pull it taut with one hand.
Steam the garment evenly from top to bottom.
4) Slowly brush the section of the fabric from top to bottom. Do not apply a lot of
pressure. The combination of steam and the clothes brush
gently removes
all wrinkles.
5) Turn off the appliance by pressing the On/Off switch
. Remove the plug
from the power socket and allow the appliance to cool down completely.
6) To remove the clothes brush
from the steam head , slide the large wing
on the underside of the clothes brush forward with your thumb until the
clothes brush detaches from the steam head (figs. D and E).
D
E
To Next Page
Loading...
Need help?
General
