GB
│
IE
│
NI
│
CY
│
9 ■
SDMF 1300 A1
Care instructions and usage recommendations
CAUTION – PROPERTY DAMAGE!
► You can use the device to treat all materials marked with these ironing
symbols:
–
(synthetic fibre, e.g. viscose, polyester)
–
(silk, wool)
– (cotton, linen)
► If the clothing care instructions forbid ironing (
symbol), the clothing
item may not be steamed with the appliance. Ignoring this warning could
lead to permanent damage to the clothing item.
► Do not treat leather, velvet, waterproofed furniture or fabrics that are
sensitive to steam. Doing so could damage the textile or the piece of
furniture.
Ƈ Before using the appliance, familiarise yourself with the manufacturer’s care
instructions on the label of your clothing.
Ƈ If are not sure whether you should steam the clothing, test the appliance on a
non-visible part of the clothing first, e.g. on the inseam.
Ƈ Apply the clothes brush
to the fabric gently and use slow movements.
Ƈ Never touch silk or velour with the steam head
.
Ƈ Heavier fabrics may need to be steamed for longer.
Ƈ Fabrics absorb moisture during steaming. Always allow garments to dry
completely after steaming.
Steam function
WARNING – RISK OF INJURY!
► Never attempt to steam pieces of clothing while they are being worn.
1) Plug the mains cable
- into the power socket and turn on the power by
pressing the On/Off switch . The blue LED flashes during the
warm-up phase. As soon as the blue LED lights up permanently, the
appliance will start producing steam.
2) Hold the appliance by the handle
3. Make sure you aim the steam openings
on the steam head
away from your body.
3) Press the steam button
and start at the top of the garment. Move the
steam head slowly downwards.
NOTE
► For the continuous steam output, you can also lock the steam button
by sliding it downwards.
► You can use the steam function with or without the clothes brush .
To Next Page
Loading...
Need help?
General
