To Next Page

To Previous Page

│

21 ■

SEM 1100 D3

Malfunction Cause Solution

The milk does not froth.

• The milk is not cold enough.

• Use milk from the

refrigerator.

• The milk frother 0 is dirty. • Clean the milk frother 0.

The pump stops during

operation, the "Espres-

so" control lamp t

ﬂashes.

• The pump stops after about 3

minutes of operation to prevent

overheating.

• Allow the appliance to

cool down before you

use it again.

All lamps 5 t z ﬂash

simultaneously.

• The temperature for the prepa-

ration of a perfect espresso is

too high.

• Wait until the machine

has cooled down and the

"Espresso" control lamp

t lights up continuously.

Disposal of the appliance

The adjacent symbol of a crossed-out dustbin means that this appliance is subject

to Directive 2012/19/EU. This directive states that this appliance may not be

disposed of in the normal household waste at the end of its useful life, but must

be taken to specially set-up collection locations, recycling depots or disposal

companies.

The disposal is free of charge for the user. Protect the

environment and dispose of this appliance properly..

Your local community or municipal authorities can provide information on how to

dispose of the worn-out product.

Silvercrest SEM 1100 D3 User Manual

Questions and Answers: