EasyManua.ls Logo

Silvercrest SEMM 1470 A1 - Customizing Espresso Volume; Setting Small Espresso Volume; Setting Double Espresso Volume

Silvercrest SEMM 1470 A1
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 
GB
IE
NI SEMM 1470 A1
Setting the amount of espresso
You can set the quantity of espresso for the programmes “Small espresso” and
“Double espresso” individually:
“Small” espresso
If you want to set a custom amount of espresso for the “Small” espresso
button .
, press and hold the “Small” espresso button . for about
3seconds until the pump starts working. Espresso starts flowing from the
espresso outlet -.
Stop the flow of espresso by pressing the “Small” espresso button .
again as soon as the required amount has flowed out. You can set a
quantity between 20 and 70ml.
The next time you prepare an espresso using the “Small” espresso button .
the new amount of espresso will be made.
NOTE
If you want to reset the setting to the preprogrammed 40 ml, switch the
appliance off using the on/off switch %. When you switch the appliance
back on using the on/off switch % press and hold the "Small" espresso
button .
until the control lamp for the "Small" espresso button .
flashes 5 times. You can now release the button .. The programme has
been reset to 40 ml.
“Double” espresso
If you want to set a custom amount of espresso for the “Double” espresso
button 
, press and hold the “Double” espresso button  for
about 3 seconds until the pump starts working. Espresso starts flowing from
the espresso outlet -.
Stop the flow of espresso by pressing the “Double” espresso button 
again as soon as the required amount has flowed out. You can set a
quantity between 40 and 150ml.
The next time you prepare an espresso using the “Double” espresso button 
the new amount of espresso will be made.
NOTE
If you want to reset the setting to the preprogrammed 80 ml, switch the
appliance off using the on/off switch %. When you switch the appliance
back on using the on/off switch % press and hold the “Double” espresso
button 
until the control lamp for the“Double” espresso button 
flashes 5 times. You can now release the button . The programme has
been reset to 80 ml.

Table of Contents

Related product manuals