GB
│
IE
│
NI
│
9 ■
SFM 850 A2
Preparations
1) Place the appliance on a horizontal, level, stable and heat-resistant surface.
NOTE
► If you wish to place the deep fat fryer below the cooker extraction hood,
ensure that the cooker is switched off.
2) Unwind all of the power cable from the cable retainer .
3) Press the lid release button . The appliance lid flips open.
4) Remove the frying basket - and attach the handle :
– press the handles together so that the holding pins can be inserted into
the eyelets on the frying basket -. The handles must lie under the
upper end of the connecting piece on the frying basket -:
– Loosen your grip on the pressed-together rods on the handle so that
the holding pins project into the holes:
To Next Page
Loading...
