Silvercrest SFPW 360 B1 - Alarm Time Configuration

SFPW 360 B1
■ 18
│
US - EN
Setting the alarm time
The device allows you to set two different alarms. The
set alarm times always relate to the time shown on the
display (local time or time zone).
♦ In basic mode, press the SET button8 once to
access alarm mode. The current alarm time is
shown on the display and the symbol for the first
alarm (AL1).
♦ Press the SET button8 for about 3 seconds. The
hours flash on the alarm time display.
♦ Press the – /WEEK LANG button5 or the
+ /12/24
button6 to set the desired value.
♦ Press the SET button8 to confirm your entry.
The minutes flash on the alarm time display.
♦ Press the – /WEEK LANG button5 or the
+ /12/24
button6 to set the desired value.
♦ Press the SET button8 to confirm your entry. The
alarm time 1 is set now.
The process for setting the second alarm time is
similar to that of setting the first.
♦ In basic mode, press the SET button8 twice to ac-
cess alarm mode. The current alarm time is shown
on the display and the symbol for the second alarm
(AL2).
♦ Now, follow the steps described above to set the
second alarm time.
IB_330014_SFPW360B1_LB9.indb 18 03.09.19 12:25