Silvercrest SFPW 360 B1 - Operation and Settings; Manual Date and Time Setting

SFPW 360 B1
■ 14
│
US - EN
The room temperature is displayed to one decimal
place under the time. The preset temperature unit
is degrees Fahrenheit ( ) and can be changed to
degrees Celsius (
).
Handling and operation
Setting the date and time manually
If no button is pressed for around 20 seconds
during manual setting of the time, the device
exits setting mode. Any settings already made
will be saved.
♦ In basic mode, press the SET button 8 for about
3seconds. The year flashes on the display.
♦ Press the – /WEEK LANG button5 or the
+ /12/24
button6 to set the desired value.
♦ Press the SET button8 to confirm your entry.
The month display flashes on the display.
♦ Press the – /WEEK LANG button5 or the
+ /12/24
button6 to set the desired value.
♦ Press the SET button8 to confirm your entry.
The day display flashes on the display.
♦ Press the – /WEEK LANG button5 or the
+ /12/24
button6 to set the desired value.
IB_330014_SFPW360B1_LB9.indb 14 03.09.19 12:25