Silvercrest SFPW 360 B1 User Manual

SFPW 360 B1
US - EN
│
21 ■
Permanent projection
For permanent projection, the power adapter must be
connected to a power supply (see section Connect-
ing to a power supply).
♦ Set the On/Off switch for permanent projection 0
to the position ON to switch on the projection.
♦ Set the On/Off switch for permanent projection 0
to the position OFF to switch off the projection.
Rotating the projection
♦ Press repeatedly the ROTATION TIME/TEMP
button4 to rotate the time/temperature projection
by 90°-steps.
Focussing the projection
♦ Turn the FOCUS dialz on the rear of the projec-
tion arm3 to focus the projection.
Switching the projection between time and
temperature
♦ Touch the
button1 to switch on the
projection.
♦ While the projection is on, press
the ROTATION TIME/TEMP button4 for
around 3seconds. The projection switches
between time and temperature.
IB_330014_SFPW360B1_LB9.indb 21 03.09.19 12:25

Silvercrest SFPW 360 B1 Specifications

General

Brand	Silvercrest
Model	SFPW 360 B1
Category	Alarm Clock
Language	English