Silvercrest SHAZ 21.6 B2 - The Suction Pipe; The Floorhead; Large Nozzle; Large Brush Nozzle

9
GB
• Both small guide pins of the filter carri-
er|must fit accurately into the small
openings underneath the unlocking
mechanism|14 of the dust container.
Dust container
Only use the dust con-
tainer|11 with the com-
plete filter unit.
• Place the dust con-
tainer|11 on the suc-
tion device|5.
• Hook the bottom end
on and then push
down the upper end
until it engages audi-
bly.
Battery
The vacuum cleaner
cannot be operated
without the charged bat-
tery mounted.
• Insert the battery|33
into the battery com-
partment|1 until it en-
gages audibly.
7.3 The suction pipe
The suction pipe|20 is
used as an extension.
All parts to be connect-
ed to the clear end of
the suction pipe can
also be plugged directly
into the opening|9 at
the suction device|5.
• Insert the suction
pipe|20 into the
opening|9 until it en-
gages.
7.4 The floorhead
In many cases, you will work with the floor-
head.
You can attach the floor-
head|22 directly to the
suction device|5 or the
suction pipe|20.
• Insert the floor-
head|22 into the
opening|9 of the suc-
tion device|5 or into
the opening|21 of
the suction pipe|20.
7.5 Large nozzle
The large nozzle|38
can be inserted directly
into the suction device|5
or into the suction
pipe|20.
• Insert the large noz-
zle|38 into open-
ing|9 or|21.
7.6 Large brush nozzle
The large brush noz-
zle|37 is always used
with the adapter|40.
• Insert the adapt-
er|40 into open-
ing|9 or|21.
• Plug the large brush
nozzle|37 onto the
adapter|40.
|11 |5
|1 |33
|5
|20
|9
|5
|20
|22
|21
|9
|5
|20
|38
|21
|9
|40
|21
9
|37