10
GB
7.7 Small nozzles
The small brush noz-
zle|36 is always used
with the adapter|39.
• Insert the adapt-
er|39 into open-
ing|9 or|21.
• Plug the nozzle|36
onto the adapter|39.
8. Vacuum cleaning
CAUTION:
~ Vacuum cleaning always requires all fil-
ters and the dust container|11 to be
mounted.
1. Mount the accessories needed.
2. Insert the battery|33 into the battery
compartment|1.
3.
Press the on/off switch |
16 to switch
the device on.
- If you would like to reduce the suction
power, press the ECO button|15
once. The button is lit green. To switch
off the function, press the button
again.
4. To switch off the device, push the on/off
switch |16 again.
5. Empty the dust container|11 and hang
up the parts in the base station|26.
8.1 Using the nozzles
In the following table, you will find an over-
view of the cleaning tasks for which the var-
ious nozzles are particularly suitable.
9. Filter and dust
container
CAUTION:
~ Vacuum cleaning always requires all fil-
ters and the dust container|11 to be
mounted.
Every operation requires the dust contain-
er|11 and all filters to be inserted:
- the metal filter|12 inside the dust con-
tainer|11,
- the paper filter|7 inside the dust con-
tainer|11,
- the motor protection filter|13 between
dust container|11 and suction device|5
and
- both exhaust air filters|2 on the sides of
the suction device|5.
|36
|21
|39
No. Nozzle Use
|36
Small
brush nozzle
Sofas, armchairs,
mattresses, furni-
ture, textiles
|37
Large
brush nozzle
Round brush:
bookshelves, hid-
den corners, floors
|38
Large nozzle Crevice nozzle:
cabinets, crevices,
corners, gaps
To Next Page
Loading...
