11
GB
8. Vacuum cleaning
CAUTION:
~ Vacuum cleaning always requires all fil-
ters and the dust container|10 to be
mounted.
1. Mount the accessories needed.
2. Insert the battery|32 into the battery
compartment|1.
3. Press the on/off switch |15
to switch
the device on.
- If you would like to reduce the suction
power, press the ECO button|14
once. The button is lit green. To switch
off the function, press the button
again.
4. To switch off the device, push the on/off
switch |15 again.
5. Empty the dust container|10 and hang
up the parts in the base station|25.
8.1 Using the nozzles
In the following table, you will find an over-
view of the cleaning tasks for which the var-
ious nozzles are particularly suitable.
9. Filter and dust
container
CAUTION:
~
Vacuum cleaning always requires all filters
and the dust container|
10
to be mounted.
Every operation requires the dust contain-
er|10 and all filters to be inserted:
- the metal filter|11 inside the dust con-
tainer|10,
- the paper filter|6 inside the dust con-
tainer|10,
- the motor protection filter|12 between
the dust container|10 and the suction
device|5 and
- both exhaust air filters|2 on the sides of
the suction device|5.
9.1 Dust container
• Hook the dust con-
tainer|10 on at the
bottom of the suction
device|5. Then press
it down at the top un-
til it engages.
• Remove by pressing the unlocking
mechanism|13 at the suction device
and remove the dust container|10.
No. Nozzle Use
|33
small
brush nozzle
Mini round brush:
keyboards and oth-
er small electrical
devices
|34
medium
brush nozzle
Sofas, armchairs,
mattresses, furni-
ture, textiles
|35
large
brush nozzle
Round brush:
bookshelves, hid-
den corners, floors
|36
small nozzle
(short)
Mini crevice noz-
zle:
small gaps and
openings
|37
small nozzle
(long)
Mini round nozzle:
electrical devices
e.g. TV, air-condi-
tioning units
|38
large nozzle Crevice nozzle:
cabinets, crevices,
corners, gaps
No. Nozzle Use
To Next Page
Loading...
