7
GB
4. Items supplied
1 suction device|5 with dust container|10
1 base station|25
1 power adapter|30
1 battery|32
1 suction pipe|19|
1 floorhead|21
1 small brush nozzle|33
1 medium brush nozzle|34
1 large brush nozzle (rotatable)|35
1 small nozzle (short)|36
1 small nozzle (long)|37
1 large nozzle|38
1 adapter|39 for the small and medium
brush nozzle and small nozzles|
1 adapter|40 for the large brush nozzle|
1 elbow adapter|41 for the small and me-
dium brush nozzle and small nozzles
2 extensions|42 for the small and medium
brush nozzle and small nozzles
1 drilling template
1 set of fixing material (2 rawlplugs,
2|screws)
1 copy of the user instructions
5. The base station
5.1 Fastening the base sta-
tion
Fasten the base station|25 to the wall using
the drilling template and the fixing material
included in the delivery.
NOTE:
• Before fastening, check that the fixing
material included in the delivery meets
your requirements (e.g. wall structure).
If not, replace it with suitable fixing ma-
terial.
1. Look for a place on the wall for the base
station|25. Make sure that there is a
wall socket nearby.
2. Using the drilling template, draw the
marking for the drill holes on the wall.
3. Drill holes with a diameter of 6 mm us-
ing a drill.
4. Insert the rawlplugs into the drill holes.
5. Tighten the screws in the rawlplugs.
6. Hang the base station|25 up on the
wall and check for a secure hold.
|25
__CPE284657_Staubsauger_B7.book Seite 7 Dienstag, 13. Dezember 2016 2:36 14
To Next Page
Loading...
