Silvercrest SIBT 16 A1 - Using the Charging Station

SIBT 16 A1
GB
│
IE
│
NI │ 11 ■
Using the charging station
The earbuds can only be charged with the charging station .
While the charging station
is being charged, the earbuds can
be charged along with the charging station
(see section
Charging the earbuds).
CAUTION
► Charge the charging station
only in dry interior spaces.
► Only use mains adapters with an output voltage of 5V and an
output current of at least 0.5A or a USB port on your computer
to charge the charging station
.
Before using the charging station
, the integrated battery must be
completely charged.
♦ Connect the charging cable USB plug
to a switched-on PC or
a suitable USB power supply (not supplied).
♦ Connect the charging cable micro-USB plug to the charging
socket (micro USB) on the charging station .
NOTE
► The operating/charging LED "CHARGE"
lights up red during
charging. When the battery is fully charged, the operating/
charging LED "CHARGE" switches off.
► Charging takes about 1.5 hours if you are only charging the
charging station
.