Silvercrest SIBT 16 A1 - Operation of the Buttons

SIBT 16 A1
■ 18 │ GB
│
IE
│
NI
Operation of the buttons
The left earbud is the main headphone and establishes the
Bluetooth
®
connection with the Bluetooth
®
device and can be
used for mono audio playback. The right earbud receives the
audio signals via the left earbud .
Headset operation is only possible via the left earbud .
Button Function
► Switching on: press for 6 seconds (both earbuds) /
message "Power on – Connected Left channel / Right
channel – Connected*"
Mono audio playback: (only via left earbud) press
for 6 seconds / message "Power on", a few seconds
later "Connected*" A reminder – in the form of a beep
– draws your attention to the fact that only one earbud
is switched on. The beep repeats for about 3 minutes
before switching off automatically.
(*The "Connected" message is only displayed when a
Bluetooth
®
connection is active)
► Switching off: press for 4 seconds / message "Power off"
► Play/Pause: press briefly
► Accept call: (only via left earbud) press briefly /
The message and the call are only audible via the
left earbud.
► Redial: (only via left earbud) press twice briefly
► End call: (only via left earbud) press briefly