Silvercrest SIBT 16 A1 - Charging the Earbuds

SIBT 16 A1
■ 12 │ GB
│
IE
│
NI
Charging the earbuds
♦ Press the earbuds carefully into the charging ports on the
charger until the earbuds click into place and the operating/
charging LED on the earbuds lights up red.
♦ Ensure that the charging contacts
on the earbuds connect
with the charging contacts
in the charging station . The ear-
buds
can only be inserted correctly into the charging station
in one position. (see fig. 1).
Fig. 1
NOTE
► The operating/charging LEDs
on the earbud light up red
during charging. When the battery is fully charged, the operat-
ing/charging LED on the earbuds goes out.
► The operating/charging LED "CHARGE"
of the charging
station lights up blue while charging the earbuds . When
the charging station is being charged together with the
earbuds , both operating/charging LEDs "CHARGE" on the
charging station light up simultaneously blue and red until the
earbuds are completely charged.
► When the operating/charging LED "CHARGE"
on the charging
station goes out while charging the earbuds , the charging
station must be charged first before the earbuds can be
charged further (see section Using the charging station).