Silvercrest SIKL 40 A1 - Page 15

SIKL 40 A1
GB
│
IE
│
11 ■
► Use only the supplied USB charging cable r to charge the speak-
er box 6.
► Remove the USB charging cable
r from the speaker box 6 when
charging is complete.
Note
► Before using the speaker box 6 for the first time, the integrated
battery must be fully charged.
► The speaker box
6 can also be charged during operation. Howev-
er, this increases the charging time.
► During charging, depending on the charging status, up to three
LEDs of the charging indicator
q light up and one LED flashes.
When the battery is fully charged, all four LEDs of the charging
indicator q will light up.
► Charging takes about 3 hours at a charging current of 1A.
When the battery is fully charged, you can play back music at a
medium volume (50%) for up to 6 hours. The playback time can
vary depending on the volume level.
► Charge the speaker box
6 as soon as only one LED of the charg-
ing indicator q is lit.
♦ Make sure that the speaker box 6 is switched off.
To switch off the speaker box 6 press the On/Off button 8
for approx. 3 seconds. The charging indicator q goes out.
♦ Connect the USB-A plug of the USB charging cable
r to a
connected USB power supply.
♦ Connect the USB-C plug of the USB charging cable
r to the
USB-C charging socket DC-5V 0 of the speaker box 6 .