Silvercrest SIKL 40 A1 - Button Functions for Bluetooth Playback

SIKL 40 A1
■ 20
│
GB
│
IE
Button functions for Bluetooth
®
playback
Note
► The following playback functions are only available when the
headphones 1 and the playback device are connected to each
other via Bluetooth
®
.
► It is possible that not all functions will be supported depending on the
smartphone used and its operating system.
► To use the voice control function, it must be set up on your smartphone.
You can find a detailed description of how to do this in the operating
instructions for your smartphone.
♦ Switch on the playback device and set the volume to minimum.
♦ Put on the headphones
1 as described in section Putting on the
headphones.
♦ Set the desired volume on the playback device.
♦ Start playback on the playback device.
Multifunction button 2
Function
1 x brief press
(during playback)
Pause playback
1 x brief press
(while paused)
Continue playback
Press and hold the right multifunc-
tion button for approx. 2 seconds
Next track
Press and hold the left multifunction
button for approx. 2 seconds
Start voice control