SIKL 40 A1
GB
│
IE
│
17 ■
Note
► The next time you turn on the speaker box 6, it will connect
automatically to the last-connected Bluetooth
®
playback device.
If your Bluetooth
®
playback device does not automatically
reconnect to the speaker box
6, you will have to re-establish the
connection manually. A detailed description of how to do this can
be found in the operating manual for your Bluetooth
®
playback
device.
► If no Bluetooth
®
connection can be established within
13 minutes, the speaker box 6 switches off automatically.
► If there is no playback within 10 minutes while the Bluetooth
®
con-
nection is established, the Bluetooth
®
connection is terminated. The
speaker box 6 is in pairing mode again and switches off automati-
cally after 3 minutes if no further action is taken.
► Make sure that the speaker box 6 is no more than 10 metres
away from the Bluetooth
®
playback device. Make sure that there
are no barriers or electronic devices placed between them.
Pairing/unpairing headphones via speaker box
with a Bluetooth
®
playback device
Note
► Once a
Bluetooth
®
connection
is established between the
speaker box
6
and
a
Bluetooth
®
playback device, you can
alternatively use the headphones
1
for playback via
Bluetooth
®
.
♦ Remove the headphones 1 from the speaker box 6 and put
them on as described in section Putting on the headphones.
Playback via the speaker box 6 stops and is continued via the
headphones 1.
♦ If you put the headphones
1 back into the speaker box 6
playback will continue through the speaker box 6.
To Next Page
Loading...
