SIKL 40 A1
GB
│
IE
│
19 ■
Note
► If you place the paired headphones
1
in the
switched-on speaker box
6
during
Bluetooth
®
playback, playback through the
speaker box
6
will continue.
► If a Bluetooth
®
connection cannot be established within
10 minutes, the
headphones
1 will automatically switch off.
► When Bluetooth
®
connection is established, if there is no
playback within 10 minutes, the
headphones
1 will automatically
switch off.
► The headphones 1 automatically reconnect to the last connected
Bluetooth
®
playback device the next time it is switched on. If your
Bluetooth
®
playback device does not automatically reconnect to
the headphones 1 you will need to connect manually. A detailed
description of how to do this can be found in the operating manual
for your Bluetooth
®
playback device.
► Ensure that the headphones 1 are no more than 10 metres away
from the Bluetooth
®
playback device. Make sure that there are no
barriers or electronic devices placed between them.
Switching the headphones on/off manually
♦ Press and hold the multifunction buttons 2 of both headphones 1
for about 2 seconds to turn on the headphones 1.
♦ Press and hold the multifunction button
2 of one headphone 1
for about 4 seconds to turn off both headphones 1.
To Next Page
Loading...
