Silvercrest SKBA 2 A1 User Manual

SKBA 2 A1
■ 10
│
GB
│
IE
│
NI
Telephone functions
The following telephone functions are only available when the headphones
and the playback device are connected via Bluetooth
®
. Some smart-
phones may not support all functions.
Make a call
♦ Use your smartphone to dial the required telephone number.
The call is automatically transferred to the headphones.
♦ Speak into the device microphone w to make your call.
Accept/reject/end a call
NOTE
► If you are listening to music and receive a call, the playback will be
paused until the call is ended and you will hear the ringtone in the
headphones. After finishing the call, the playback will be resumed
automatically.
► You can accept/reject calls via the headphones or your smartphone.
The sound is automatically played back through the headphones.
► You can switch the audio source at any time via your smartphone.
To do so, please follow the operating manual of your smartphone.
button 5
Function
Press 1 x (for incoming call). Accept call
Press and hold for 2 seconds, then release (for
incoming calls)
Reject call
Press 1x (during call) End call
Press 2x Redial
AUX IN mode
You can use the supplied audio cable u to connect the headphones
to non-Bluetooth
®
-capable devices. In AUX IN mode, the headphones
behave like normal cable-connected headphones and can even be used with
an empty battery. The Bluetooth
®
function is deactivated and the buttons
on the headphones do not function. Speaker mode can be switched on in
AUX IN mode as long as the battery is sufficiently charged.
♦ Make sure that the headphones are switched off. To switch off the head-
phones, press and hold the
button 5 until you hear a rising
series of beeps and the operating/charging LED 0goes out.
♦ Connect the audio cable u to the AUX IN qconnection socket on the
headphones.

Silvercrest SKBA 2 A1 Specifications

General

Brand	Silvercrest
Model	SKBA 2 A1
Category	Headphone
Language	English