Silvercrest SKBA 2 A1 User Manual

SKBA 2 A1
GB
│
IE
│
NI
│
11 ■
♦ Connect the audio cable u to the audio output (e.g. headphone jack) on
the playback device.
♦ Switch on the playback device and set the volume to minimum.
♦ Put on the headphones as described in the section “Wearing the
headphones”.
♦ Set the desired volume on the playback device.
Speaker mode
You can also use the headphones as mobile speakers.
In Bluetooth
®
mode
♦ Connect the headphones with a playback device as described in the
section “Pairing the headphones with a Bluetooth
®
device”.
♦ Move the slider switch
3 to the
position. The blue LED 2
indicates that speaker mode is activated.
♦ Move the slider switch
3 to the
position to deactivate speaker
mode.
In AUX IN mode
♦ If you are using a playback device in Bluetooth
®
mode, ensure that the
Bluetooth
®
function on the playback device is deactivated before you
connect the headphones with the audio cable u.
♦ Connect the headphones to a playback device as described in the section
“AUX IN mode”.
♦ Move the slider switch
3 to the
position.
♦ Press the
button 5 for about 2 seconds until the operating/
charging LED 0 flashes blue and the LED 2 lights up blue. Speaker
mode is now activated.
♦ Move the slider switch
3 to the
position to deactivate speaker
mode.
Storing the headphones
Your headphones are fitted with swivelling earpieces, allowing them to be
folded and stored without taking up much space.
Proceed as follows to fold the headphones:
♦ Swivel both earpieces e + r so that they are inside the
headband 1. You can now store the headphones in a
space-saving way.

Silvercrest SKBA 2 A1 Specifications

General

Brand	Silvercrest
Model	SKBA 2 A1
Category	Headphone
Language	English