Silvercrest SLE 200 A1 - Appendix and Compliance; Technical Data; EU Declaration of Conformity Notes

■ 20
│
GB
│
IE
SLE 200 A1
Appendix
Technical data
Input voltage 220–240 V ∼ (alternating current), 50 Hz
Input power 200 W
Nominal current 1.25 A
Max. output power 245 W
Max. nominal current 1.4 A
Air flow rate 120 m³/h
Refrigerant R290
Fill level 35 g
Intake pressure 1.2MPa
Discharge pressure 2.5MPa
Dehumidification
performance/24h*
10l (at 30°C/80% rh)
5l (at 27°C/60% rh)
Recommended room size
approx. 16m
2
or approx. 37m
3
(at a ceiling height of 2.3m)
Operating temperature 5°C to +32°C
Dimensions approx. 28 x 46 x 24 cm
Weight approx. 8.5 kg
* The lower the ambient temperature and the colder the temperature outside
becomes, the less moisture accumulates in the air and flows from outside into
the room to be dehumidified. For this reason, dehumidification performance
steadily decreases when temperatures drop and can come to a standstill. This
does not mean that the appliance is defective.
Notes on the EU Declaration of Conformity
In terms of compliance with fundamental specifications and other relevant
regulations, this appliance complies with the Low Voltage Directive 2014/35/EU,
the Electromagnetic Compatibility Directive 2014/30/EU and the Ecodesign
Directive 2009/125/EC.
The complete EU Declaration of Conformity is available from the importer.