Silvercrest SLE 320 C4 - Operating Status Displays

GB
│
IE
│
NI
│
13 ■
SLE 320 C4
Operating status displays
The different operating states are shown on the control panel  via LEDs and
the display 0. In addition, there is an LED panel  on the appliance, which
uses different colours to indicate the relative humidity range in the room.
LED indicators
LED lit Meaning
TANK FULL , The water tank  is full or not inserted.
TIMER .
A switch-off time has been activated.
DRY CLOTHES
TARGET HUMIDITY
AIR CLEAN
-
Shows the selected programme.
OPERATION +
The appliance is switched on.
AUTO DEFROST &
Automatic defrosting is activated.
Display indicator
Display Meaning
During operation, the current relative humidity value is
permanently displayed in %.
Hold the UP arrow 6 for approx. 3 seconds to display the
current ambient temperature in °C. After approx. 5 seconds the
display automatically changes back to the humidity value.
LED panel
Colour Meaning
Red Relative humidity HIGH (> 70%)
Green Relative humidity MID (≥ 50 to ≤ 70%)
Yellow Relative humidity LOW (< 50%)
NOTE
► Note that the values for the relative humidity have a tolerance of approx.
± 3 %, and switching on the appliance or dehumidification may be slightly
delayed.