EasyManua.ls Logo

Silvercrest SLE 320 C4 - Selecting Programmes

Silvercrest SLE 320 C4
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 
GB
IE
NI
SLE 320 C4
Selecting programmes
The appliance has 3 distinct programmes.
Press the MODE button
3 repeatedly to set the desired program.
The programme LED -of the set programme lights up.
DRY CLOTHES
You can use this programme to dry damp laundry faster. Move the flap on
the air outlet so that the airflow is directed towards the garments to be dried.
Changes regarding the desired air humidity and the fan level are not possible in
this programme.
TARGET HUMIDITY
This programme offers you the option of setting the desired air humidity level that
should be achieved yourself.
Press the UP arrow
6 or DOWN arrow 1 to set the desired humidity
in 5% steps between 30% and 80%. The set value flashes on the display 0
for approx. 5 seconds and then the current relative humidity value is shown
again.
Additionally, you also have the option to select the setting if you want to
make a setting below 30% relative humidity. This setting allows you to achieve
a very low humidity as the dehumidification runs permanently.
Press the FAN SPEED button ! to select the desired fan level.
The LO LED # or the HI LED $ indicates which fan level is set.
NOTE
The minimum humidity that can be achieved in
mode is dependent on
many factors, such as the room size or the ambient temperature, etc.
Therefore, it is not possible to define a generally applicable minimum value.
AIR CLEAN
No dehumidification takes place in this programme. The room air is sucked in
through the filter in front of the air inlet opening and cleaned there. Select this
programme if you want to purify but not dehumidify the air in the room.
Press the FAN SPEED button ! to select the desired fan level.
The LO LED # or the HI LED $ indicates which fan level is set.

Table of Contents

Related product manuals