GB
│
IE
│
NI
│
7 ■
SLS 3 A1
Shaving
NOTE
► If your skin is sensitive or prone to allergic skin
reactions, try the shaver first on a small, unobtrusive
area.
1) Ensure the shaver unit 2 is attached and locked in
place.
2) Press the travel lock, which is located on the on/off
switch 5 and push the on/off switch 5 towards the
shaver unit 2. The appliance starts.
The travel lock ensures that the appliance does not
start up accidentally, for example, when stowed away.
NOTE
► Before dry shaving, ensure that your skin is free of
cream or oil residue. Your skin should be clean and
dry.
3) Hold the shaver perpendicular to the skin and guide
the shaver unit 2 in straight movements against the
direction of hair growth. Apply repeatedly. The small
rubber lip in front of the shaving head 3 ensures that
the skin is pulled tight and also causes the hairs to
stand upright a little.
4) After you have covered all the areas you want to
shave, push the on/off switch 5 back into its initial
position. The appliance stops.
5) Clean the shaver after every use with the supplied
cleaning brush 9. For a more thorough cleaning,
read the section “Cleaning, care and maintenance”.
To Next Page
Loading...
Need help?
General
