Silvercrest SLS 3 A1 - Cleaning with the Cleaning Brush

■ 10
│
GB
│
IE
│
NI
SLS 3 A1
Cleaning with the cleaning brush
Shaving head/shaver unit
Clean the shaving head 3 under the shaver unit 2 with
the cleaning brush 9.
1) Press the two release buttons 4 and pull the shaver
unit 2 upwards off the appliance.
2) Tap the shaver unit 2 on a flat surface and blow
off the hair cuttings. Use the cleaning brush 9 if
necessary. Blow loose hair from the shaving foils.
3) Use the cleaning brush 9 to clean the shaving
head 3.
Trimmer
■ Clean the trimmer 1 after every use with the supplied
cleaning brush 9.
■ Oil the trimmer 1 roughly every 6 months with a drop
of sewing machine oil:
■ Turn on the shaver for a short while to distribute the oil
on the blades.
Long-hair trimmer attachment
■ Rinse the long-hair trimmer attachment w under
running water.
Housing
■ Clean the housing with a moist cloth.