Silvercrest SLS 3 A1 User Manual

■ 8
│
GB
│
IE
│
NI
SLS 3 A1
NOTE
► This shaver is also suitable for use in the shower. Do
not, however, immerse the appliance in water. This
will cause irreparable damage to the appliance!
For longer hair
If you have not shaved for some time, for instance, on your
legs, you should use the trimmer 1 before shaving as
described in the section “Shaving”.
1) Ensure the shaver unit 2 is attached and locked in
place.
2) Press the travel lock and push the on/off switch 5
in the direction of the shaver unit 2. The appliance
starts.
NOTE
► Before dry shaving, ensure that your skin is free of
cream or oil residue. Your skin should be clean and
dry.
3) Hold the shaver so that the trimmer 1 is pointing
towards your leg at a slight angle (approx. 45°).
Move the trimmer 1 slowly against the direction of
hair growth.
4) After you have covered all the areas you want to
shave, push the on/off switch 5 back into its initial
position. The appliance stops.
5) Clean the shaver after every use with the supplied
cleaning brush 9. For a more thorough cleaning, read
the section “Cleaning, care and maintenance”.

Silvercrest SLS 3 A1 Specifications

General

Brand	Silvercrest
Model	SLS 3 A1
Category	Electric Shaver
Language	English