■ 6
│
GB
│
IE
│
NI
SLS 3 A1
CAUTION – PROPERTY DAMAGE!
► Never submerse the appliance in
water or other liquids.
► Defective components must always
be replaced with original replace-
ment parts. Compliance with safety
requirements can only be guaran-
teed if original replacement parts
are used.
Inserting/replacing the batteries
NOTE
► Always use 1.5 V, AAA type batteries.
► Pay attention to the correct polarity when inserting
the batteries 0.
1) Turn the lock 8 a quarter turn.
2) Now pull off the battery compartment cover 7 together
with the lock 8.
3) If inserted: Remove the discharged batteries 0 from the
battery compartment 6.
4) Insert new batteries 0 as shown in the polarity diagram
in the battery compartment 6.
5) Push the battery compartment cover 7 back onto the
appliance and turn the lock 8 back.
The battery compartment 6 is now closed.
To Next Page
Loading...
