Silvercrest SLTE 70 A1 - Device Setup and Operation; Attaching the Speaker Stand; Switching Speakers On;Off

SLTR 70 A1 / SLTE 70 A1
■ 44
│
GB
│
MT
Attaching the stand (only for SLTR 70 A1)
♦ Insert the stand w into the recess provided on the back of the unit (fig. D).
D
♦ Place the device on the stand w (fig. E).
E
Handling and operation
This section provides you with important information on handling and using the
device.
Switching the speakers on/off
♦ Press and hold the button 5 for about 2 seconds to switch the speaker
on and activate the Bluetooth
®
function. The red LED 8 flashes twice
and you will hear a beep.
♦ Press and hold the
button 5 again for about 2 seconds to switch the
speaker off and deactivate the Bluetooth
®
function. You will hear a
beep and the red LED 8 flashes twice.