GB
│
MT
│
45 ■
SLTR 70 A1 / SLTE 70 A1
Pairing the speaker with a Bluetooth
®
music device
Before you can use the speaker for music playback via Bluetooth
®
, you must
pair it with a compatible external Bluetooth
®
playback device.
♦ Press and hold the
button 5
for about 2 seconds to switch the speaker
on and activate the Bluetooth
®
function. The red LED 8 flashes twice
and you will hear a beep. Then, the red LED
8 and the blue LED 9
flash alternately.
♦ Set the external playback device so that it scans for Bluetooth
®
devices.
You can find a detailed description of how to do this in the operating
instructions for your external playback device.
♦ Select the entry SLTR 70 A1 or SLTE 70 A1 from the list of found
Bluetooth
®
devices in the settings menu of your external playback
device. The external playback device is now automatically connected to
the speaker via Bluetooth
®
. You will hear a short beep when the con-
nection has been successfully established and the blue LED
9 lights up.
You can now use the speaker to listen to music from your external playback
device wirelessly. The blue LED
9 flashes every 2 seconds to indicate the
established Bluetooth
®
connection.
NOTE
► The next time you turn on the speaker, it will connect automatically to the
last-connected external playback device. If your external playback device
does not automatically reconnect to the speaker, you will have to re-estab-
lish the connection manually. You can find a detailed description of how
to do this in the operating instructions for your external playback device.
► If you want to connect the speaker to another external playback device,
you must first unpair the currently connected playback device. To do this,
press the
button 1 for about 2 seconds. You will hear a beep. Alter-
natively, you can disconnect via the currently connected playback device.
► If the Bluetooth
®
function is activated, the speaker switches itself off
automatically after 2 minutes if no Bluetooth
®
connection is made to
an external playback device.
►
As soon as you connect the AUX input 6
to the 3.5 mm jack cable q,
the Bluetooth
®
function is deactivated and the speaker switches to AUX
mode.
To Next Page
Loading...
