Silvercrest SLTE 70 A1 - Music Playback Controls; Button Functions Overview; Volume and Track Navigation; Bluetooth Disconnection

SLTR 70 A1 / SLTE 70 A1
■ 46
│
GB
│
MT
Functions of the buttons during music playback
Button Function
► Press for 2 seconds to switch the device on/off.
► Press briefly to play/pause the music.
(Only for playback via Bluetooth
®
)
► Press briefly to mute the speaker. Press briefly again to unmute.
(AUX mode only)
/
► Press briefly to increase the volume. When you reach the maxi-
mum volume you will hear a short beep. Alternatively, you can
increase the volume on the external playback device.
► Press and hold for 2 seconds to jump to the next track.
(Only for playback via Bluetooth
®
)
/
► Press briefly to decrease the volume. When you reach the mini-
mum volume, you will hear a short beep. Alternatively, you can
increase the volume on the external playback device.
► Press and hold for 2 seconds to jump back to beginning of
the track. Press and hold again for 2 seconds within 2sec-
onds to jump to the previous track. (Only for playback via
Bluetooth
®
)
► Press and hold for 2 seconds to disconnect the currently
connected external Bluetooth
®
playback device from the
speaker. (Only with active Bluetooth
®
connection)
After that, the red LED 8 and the blue LED 9 flash alternately
and the speaker can be reconnected to an external playback
device.
NOTE
► The volume settings on the speaker and the external playback device are
independent of each other. For example, if the volume of the speaker is
set to maximum and the volume of the external playback device is set to
minimum, you will hear nothing through the speaker.