GB
│
MT
│
47 ■
SLTR 70 A1 / SLTE 70 A1
Connecting external playback devices (AUX mode)
In AUX mode, you can connect external playback devices such as an MP3
player or a smartphone to use them as the playback source for the speaker.
♦ Ensure that the speaker is switched off.
♦ Connect the external playback device using the 3.5 mm jack cable
q to
the AUX input
6 on the loudspeaker.
♦ Press and hold the
button 5
for about 2 seconds to switch the speaker
on. The red LED
8 flashes twice and you will hear a beep. Then, the blue
LED 9 lights up.
♦ Start playback on the external playback device.
♦ Set the desired volume using the
/ button 2 or the / button 3
on the speaker. Alternatively, you can increase the volume on the external
playback device.
♦ Press the
button 4 if you want to mute the speaker. Pressing the
button 4 again briefly will unmute the speaker.
♦ To exit AUX mode, turn off the speaker and remove the 3.5 mm jack
cable
q from the AUX input 6 on the speaker.
NOTE
►
In AUX mode, the speaker switches off automatically after 15 minutes if
no playback is made via an external playback device.
► In AUX mode, the Bluetooth
®
function is deactivated. It is also no longer
possible to use the / button 2 or the / button 3 to jump to
the next/previous track.
To Next Page
Loading...
