Silvercrest SMS 300 A1 - Parts and Operating Components; Safety Switches

■ 8
│
GB
│
IE
│
NI
│
CY
SMS 300 A1
Parts and operating components
(See fold-out page for illustrations)
1 Handle
2 On/Off switch
3 Dust container
4 Dust filter (in the dust container)
5 Ventilation opening
6 Power cable
7 Vibration head
8 UV-C lamp
9 Suction opening
0 Safety switches
q Rollers
w Vibration button
e UV-C lamp cover
Safety switches
The appliance has two safety switches 0 on the left and right of the underside
of the appliance. The UV-C lamp 8 only switches on when the vibration button w
is pressed if both safety switches
0 are pressed simultaneously. This deactivates
the automatic switch-off of the UV-C lamp
8. This happens automatically when
the switched-on appliance is placed on a level surface (fig. A).
A
UV-C lamp on
If the safety switches lose contact with the substrate, the automatic switch-off
function is activated and the UV-C lamp 8 stops lighting (figs. B and C).
B
UV-C lamp off
C
UV-C lamp off