GB
│
IE
│
NI
│
CY
│
13 ■
SMS 300 A1
Changing the UV-C lamp
WARNING! RISK OF INJURY!
► The UV-C lamp
8 gets hot during use. Allow the UV-C lamp 8 to cool
down sufficiently after use. Otherwise, there is risk of burns.
► The technical information data for the UV-C lamp
8 can be found in the
section Technical data.
♦ Use a screwdriver to loosen the screw on the cover
e of the UV-C lamp 8
and remove the cover e.
♦ Pull the UV-C lamp
8 out of the plug connections.
♦ Insert a new UV-C lamp
8 into the plug connections.
♦ Put on the cover
e and fix it back in place with the screw.
Storage
♦ Store the appliance in a clean and dry place away from direct sunlight.
Disposal of the appliance
NOTE
► Remove the UV-C lamp
8 before disposing of the appliance and dispose
of it separately from the appliance.
The adjacent symbol of a crossed-out wheelie bin means that this appliance is
subject to Directive 2012/19/EU. This directive states that this appliance may
not be disposed of in normal household waste at the end of its useful life, but
must be brought to a specially set-up collection point, recycling depot or disposal
company.
This disposal is free of charge for the user. Protect the
environment and dispose of this appliance properly.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.
To Next Page
Loading...
