Silvercrest SND 3600 C2 - Troubleshooting Common Issues; Fault Diagnosis and Solutions

SND 3600 C2
GB
│
IE
│
NI
│
17 ■
Troubleshooting
The following table will help you to identify and rectify minor
malfunctions:
Fault Possible cause Remedy
PWR LED
does
not light up.
The device is not
correctly connected.
Connect the device.
Poor image quality.
Dust on the scanner's
background lighting.
Clean the back-
ground lighting (see
section "Cleaning").
Dust on the film/slide. Clean the film/slide.
The scanned images
are blurred.
The lens of the scanner
has fogged up due to
temperature differences.
Wait until the device
has acclimatised to
room temperature.
NOTE
► If the above-mentioned solutions do not resolve the problem,
please contact Customer Service (see section Service).