18
Twin needle
Please note:
When sewing with twin needle, always
proceed slowly, and make sure to maintain
a low speed to insure quality stitching.
- Make sure that the two threads used to
thread the twin needle are of the same
weight. You can use one or two colors.
- Insert the twin needle in the same way as
single needle. Flat side of needle should
face away from you.
- Follow instructions for single needle
threading. Thread each needle separately.
When using twin needle on zig-zag make
sure the stitch width dial is set between "0"
and "3". Do not use twin needle at setting
above "3".
Stitch Stitch width Stitch length
A2.51~4
Scallop stitching
Stitch Stitch width Stitch length
I3~51~2
This machine automatically produces a
scallop stitch which may be used as
decorative edging.
- Sew the scallop stitch along the edge of the
material. (1)
- If desired, trim around the scallop with
scissors to create a scalloped edge. Be
careful not to cut the thread. (2)
12
Silver Crest SNM 33 A1
To Next Page
Loading...
Need help?
General
