Silvercrest SNM 33 A1 User Manual

4
Connecting machine to power source
Attention:
Attention:
Sewing light
Foot control
Unplug power cord when machine is not
in use.
Consult a qualified electrician if in doubt
as to connect machine to power source.
Unplug power cord when machine is not
in use.
The foot control must be used with the
appliance by KD-2902 (220-240V area)
manufactured by
Connect the machine to a power source as
illustrated.
Press main switch (A) for power and light on.
("l")
Foot control regulates the sewing speed.
FDM (zhejiang founder
motor corporation ltd, China).
A
Changing the bulb
Disconnect the machine from the power
supply by removing the plug from the main
socket!
- Loosen screw (A) as illustrated.
- Remove the cover (B).
- Unscrew the bulb and fit new one (C).
- Replace the cover and tighten screw.
Should there be any problem. Ask your
local dealer for advice.
Silver Crest SNM 33 A1
A
B
C

Silvercrest SNM 33 A1 Specifications

General

Brand	Silvercrest
Model	SNM 33 A1
Category	Sewing Machine
Language	English