Silvercrest SRR 3.7 D3 User Manual

GB
│
IE
│
9 ■
SRR 3.7 D3
9 symbol (travel lock)
0 Mains connection
Figure B (rear fold-out page):
q Mains adapter
w Connector
e Brush
Charging the battery
The battery should be charged for at least 60 minutes before first use.
Note
► Ensure that the appliance is switched off before charging the
battery.
1) Plug the connector w into the mains connection 0 on the shaver.
2) Plug the mains adapter
q into a mains socket that complies
with the appliance specifications. While the battery is charging,
the red charge indicator light 8 flashes.
♦ When the battery is fully charged, the blue control lamp
7
lights up. Disconnect the product from the mains supply.
♦ Once the battery is fully charged, you can use the appliance for
around 60 minutes without connecting it to the power supply.
♦ If the red indicator light
8 flashes, the battery charge level is
too low. Recharge the battery in that case.

Silvercrest SRR 3.7 D3 Specifications

General

Brand	Silvercrest
Model	SRR 3.7 D3
Category	Electric Shaver
Language	English