Silvercrest SRR 3.7 D3 - Long hair trimmer (cleaning); Cleaning under running water

GB
│
IE
│
13 ■
SRR 3.7 D3
Long hair trimmer
■ Clean the long hair trimmer
4 after every use with the supplied
brush e.
■ Oil the long hair trimmer
4 around every 6 months with a drop
of sewing machine oil.
Cleaning under running water
1) Take hold of the cutting unit 2 with three fingers in the grip
recesses 3 and pull it off.
2) Hold the cutting unit 2 under the running water so that the water
flows through the shaving heads from the inside to the outside.
ATTENTON!
► Hold only the cutting unit 2 under running water! The shaver
handset can be damaged irreparably if it is held under running
water.
3) Allow the cutting unit
2 to dry.
4) Replace the cutting unit 2 flush on the appliance. Ensure that it
snaps into place and is seated firmly.