Silvercrest SSH 600 B2 - Fault Causes and Remedies; Appendix; Technical Specifications

SSH 600 B2
■ 18
│
GB
│
IE
Fault causes and remedies
The following table will help you to identify and rectify minor
malfunctions:
Fault Possible cause Remedy
The appliance
will not switch
on.
The plug is not con-
nected.
Insert the plug com-
pletely into the mains
power socket.
The mains socket is not
supplying any power.
Check the house mains
fuse.
The tilt cut-out has
been activated.
Plug the appliance up-
right into the mains sock-
et with the display3 at
the top.
The appliance
switches itself to
standby mode.
The set heating time
has expired.
Increase the heating
time if you wish.
Note: If the above-mentioned solutions do not resolve the prob-
lem, please contact Customer Service (see section Service).
Appendix
Technical specifications
Input 220–240 V ∼ (AC), 50 Hz
Output
High heat level
Low heat level
600W
500W
Protection class
II /
(double insulation)