SSM 550 D1
GB
│
CY
│
9 ■
NOTE
► Do not fill the blender attachment with more than 180 g of ice cubes.
Otherwise, the appliance will not crush the ice cubes optimally.
Filling during operation
WARNING – RISK OF INJURY!
► Never insert cutlery items or mixing tools into the blender attachment
when the appliance is in use. There is a considerable risk of injury if these
come into contact with the swiftly rotating cutting blades !
► Do not open the lid . Food could fly out at high speed!
NOTE
► If you want to add a little extra while the appliance is running, use only the
measuring cap provided for this purpose.
To add food while the appliance is running...
1) Turn the measuring cap anticlockwise and remove it.
2) Add the ingredients.
3) Then replace the measuring cap in the opening in the lid and close it by
turning it clockwise.
Removing the blender attachment
Once you have finished processing the food in the attachment:
■ Always start by placing the switch into the “OFF” position and pulling out
the mains plug.
■ Wait until the motor has come to a complete standstill before lifting the blender
attachment directly upwards. You do not need to turn the blender attach-
ment while doing this.
■ To achieve the best results when pureeing solid ingredients, add only small
portions to the blender attachment instead of a large amount at once.
■ If you are working with solid foods, cut them into small pieces (2–3 cm).
■ When mixing liquid ingredients, start by adding small quantities of liquid.
Add further liquid as required through the opening in the lid.
To Next Page
Loading...
