■ 82
│
GB
│
MT
SV 125 C5
NOTE
► You can order suitable bags and containers separately. Please refer to
section "Ordering replacement parts".
► The vacuum hoses u and adapters i/o/p are also compatible with
bags and containers made by other manufacturers.
Adapters e.g. suitable for
Adapter A i
CASO* (VacuBoxx series), Ernesto,
various bags with a valve
Adapter B o
FoodSaver** (FFC02XX, FFC002X, 003X,
005X, 008X, 010X storage containers,
lunchbox set T020-00024), various bags
with a valve
Adapter C p
CASO* (vacuum container set, wine
stoppers), FoodSaver** (container set
FSC003)
Without adapter
FoodSaver** (wine stopper, marinating
box)
*CASO is a registered trademark of Caso Holding GmbH.
**FoodSaver is a registered trademark of Sunbeam Products, Inc.
Vacuuming sealing bags
1) Connect the vacuum hose u onto the suction fitting
9 of the appliance.
2) Select the appropriate adapter A/B i/o for the bag you want to vacuum
and attach it to the vacuum hose u.
3) Close the appliance lid 1. Ensure that both corners of the appliance lid 1
click closed. If necessary, press them down once again on the markings
and
so that the appliance lid 1 clicks into place and locks shut.
4) Close the bag to be vacuum sealed carefully. Vacuum sealing only works
properly if the bag is completely closed off. Position the bag so that the
extraction opening of the bag is lying on a smooth surface.
5) Press the adapters A/B i/o firmly onto the round extraction opening on
the bag.
6) Press the
button z. The control lamp z lights up and the appliance
sucks the air out of the bag. As soon as all the air is sucked out, the control
lamp z goes out.
7) You can now remove the adapter A/B i/o from the bag.