Why are the seams not tight on my Silvercrest SFS 110 B2 Food Saver?
If the seams created by your Silvercrest Food Saver are not tight, make sure that the film is positioned smoothly between the sealing strip and the welding wire. Also, check the film itself; if it's damp or contaminated at the seam, this can prevent a tight seal.
What to do if seams are not tight with my Silvercrest Food Saver?
If the seams created by your Silvercrest Food Saver are not tight, make sure the film is positioned smoothly between the sealing strip and the welding wire. Also, check if the film was damp or contaminated at the seam.
Why are seams not tight on my Silvercrest SFS 110 B2?
If the seams created by your Silvercrest Food Saver aren't tight, ensure that the film is positioned smoothly between the sealing strip and the welding wire. This issue may occur if the film was damp or contaminated at the seam.
Why are the seams not tight on my Silvercrest Kitchen Appliances?
If the seams of your Silvercrest Kitchen Appliance are not tight, it could be due to the film being damp or contaminated at the seam. Make sure the film is positioned smoothly between the sealing strip and the welding wire.
General| Brand | Silvercrest |
|---|---|
| Model | SFS 110 B2 |
| Category | Food Saver |
| Type | Vacuum Sealer |
| Power | 110 W |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Vacuum pressure | 0.8 bar |
| Suitable bag width | 30 cm |
| Weight | 1.5 kg |
| Functions | Vacuum sealing |
To Next Page