Multi-band tuner WE-2100
64 - English
Remove batteries when the device is not to be
used for a long time.
Connecting a Plug-Type Power Adapter
Remove the batteries from the battery compartment located on
the back panel of the device if any are inserted. Plug the power
adapter plug into the receptacle [16] of the multi-band tuner.
Plug the power adapter into a wall outlet.
Powering the Device On/Off
To power the device on, press the On button [5] once. When
powered on, the device will display the currently tuned-in
frequency and the frequency band
(FM, MW, SW).
To power the device off, press and hold the Off button [6] until it
powers off. When powered off, the current time will be shown
on the display.
To Next Page
Loading...
