Multi-band tuner WE-2100
English - 65
Setting the Time
The time can only be set while the device is powered off. If it is
still powered on, press the Off button [6] to power the device off.
Press and hold the TIME button [11].
Then press the HOUR button [9] repeatedly to set the hour.
You can also keep the HOUR button [9] pressed down to
accelerate the digit adjustment. To distinguish ante meridian
(morning) and post meridian (afternoon) time, "PM" will
display for post meridian clock hours.
Keep the TIME button [11] pressed. Then press the MIN
button [10] repeatedly to set the minutes. You can also keep
the MIN button [10] pressed down to accelerate the digit
adjustment.
Release the TIME button [11] after the clock has been set
correctly.
Please note that you should adjust the clock
when moving into a different time zone.
To Next Page
Loading...
