Silvercrest WE-2100 - Setting the Alarm Clock

Multi-band tuner WE-2100
English - 67
Setting the Alarm Clock
Make sure that the clock has been set correctly (see the
page 65 – Setting the Time). The alarm time can only be set
while the device is powered off. If it is still powered on, press
the Off button [6] to power the device off.
 Press and hold the ALARM button [12].
 Then press the HOUR button [9] repeatedly to set the hours
of the alarm time. You can also keep the HOUR button [9]
pressed down to accelerate the digit adjustment. To
distinguish ante meridian (morning) and post meridian
(afternoon) time, "PM" will display for post meridian clock
hours.
 Keep the ALARM button [12] pressed. Then press the MIN
button [10] repeatedly to set the minutes of the alarm time.
You can also keep the MIN button [10] pressed down to
accelerate the digit adjustment.
 Release the ALARM button [12] after the alarm clock has
been set correctly.