To Next Page
C
Crystal RodriguezJul 27, 2025
Why is material not blasting from my Silverline 633629 Power Tool?
- RRobert PhillipsJul 27, 2025
If the material is not blasting from your Silverline Power Tool, it could be due to several reasons. First, ensure that you set the correct air pressure according to the specifications. Another reason may be that the material hose is clogged, in this case, remove the rubber hose and clear any blockages. Check your air supply for blockages, and if necessary, disassemble and clean the sandblasting gun. Finally, the abrasive might be incompatible (too coarse or too heavy), so choose a suitable abrasive.
General
