b) Operators should not operate any RF transmitter or power amplifier with any of its covers removed,
nor should they allow anyone else to do so.
Table 1 Safe Working Distances
General Safety Notes
• A flashing/steady Red LED status indication is a normal condition, and is not meant to
convey a fault condition.
• The Power Disconnect Device for the product is the connector for the external AC/DC
Adapter or other DC power source.
• Although the Low Voltage DC powered units are approved for Outdoor use
(Dust/Temporary Immersion), the optional AC power option with AC/DC power supply is
only certified for indoor use.
• The unit housing serves as a heatsink, and must be mounted on a non-combustible
surface.
• The units are not User Serviceable. Contact the manufacturer for further instructions on
servicing or repair.
• All symbols, markings and warning statements marked on the equipment are shown
below for reference.